Holmenkol
-
Holmenkol WooDo Wash:
- Contains: 305gr (250ml) - 55,60 Euro pro 1L
- Suitable for all membrane textilesand elastic fabrics (e.g. soft shell, fleece)
- Cleans breathable sportswear with care
- Effectively prevents the formation of odors
Holmenkol Wash Proof waterproofing:
- Contains: 305gr (250ml) - 55,60 Euro pro 1L
- Ecological liquid waterproofing with a water basis
- Suitable for membrane textiles (e.g. GORE-TEX®)*, synthetic fillers and elastic fabrics (e.g. soft shell, fleece)
- Preserves their breathability
-
- Melting temperatur: 115 ~125 °C
- Snow temperature: For snow temperatures from 0° to -4°C!
- Contains: 150gr/160ml Wachs
High quality base and training wax based on hydrocarbon basis. For soft, fresh and fine-grained snow. Stands out due to extreme abrasion resistance.
-
- Dimensions: 100 mm x 20 mm x 6 mm.
The aluminium oxide stone softens edges before grinding and removes coarse damage - very important, because without the oxide stone you will damage the file!!!!
It is the inexpensive alternative to the coarse diamond file.
Grinding stones are indispensable for edge grinding. They are used to remove hardening on the edge before grinding with the file, which would otherwise damage the expensive files. After grinding, the edges are polished, because the smoother the edge, the longer the sharpness lasts. -
- Size: 125x70mm
The ideal all-round brush.
Indispensable for brushing out wax after hot waxing.
Rough copper brush suitable for cleaning the ski base before and after waxing and for brushing out hot wax.
Perfect for exposing the structure. -
- Size: 125x70mm
Ideally suited for polishing up waxed skis/boards.
Indispensable for brushing out wax after hot waxing.
Universal brush for all steps of ski preparation. -
- Size: 125x70mm
Optimal steel brush for cleaning the base before and during waxing with hot wax.
-
- Angle can be adjusted by degrees between 0.5° and 1.5°
- Can be used for all files width 20-25mm and thickness 6mm
- Note: Comes withhout files
World Cup tool for running base - side edging of alpine skis and snowboards.
Ideal tool for removing steel edges from the surface of skis and snowboards. -
- Snow temperature: For snow temperatures from -4° to -14° C
- Contains: 250ml Wax
New liquid wax variant of the top seller Betamix. Suitable for all types of snow!
Simple application: Apply to the surface with a fleece, leave to soak in for approx. 10 min and then polish out! -
- Melting temperatur: 125 ~135 °C
- Snow temperature: For snow temperatures from -4° to -14° C
- Contains: 150gr/160ml Wachs
High quality base and training wax with a hydrocarbon basis. For all snow types.
Easy application, stands out due to extreme abrasion resistance. Ideal for use as transport wax. -
- Scope of delivery: 500 pcs
- Colour: Mix
Plastic plugs in different colours for closing old holes during binding assembly.
The plugs are hammered firmly into the old holes (using special binding glue), the excess is cut off cleanly - this way you can close an old hole securely and tightly again. -
- Size: 125x70mm
The Holmenkol Base Brush Micro Finish x-fine is a very fine and effective steel brush for absolutely perfect brushing out to the deepest structures.
Removes last wax residues deep inside the structure and provides more speed.
Optimally suited for finishing products. -
- Contains: 20 pieces
Durable special fleece for all cleaning and finishing work.
Ideally recommended for use with HOLMENKOL Liquid products. -
- Grinding angle adjustable from 90° to 85° in 0,5° Klicks
- Cuts metal and plastic
- Perfect Sidecut adjustment due to two movable inserts
- Note: Comes with a high quality knife 20588
To remove the ABS material from the sidewall (this prevents the file from becoming clogged with plastic material!).
Note: The ABS material MUST be removed before sanding the edge, otherwise the edge cannot be sanded free and get the perfect angle. -
- Size: 300mm x 30mm
- Cut: 9TPI
World Cup proven coarse, large file for pre-grinding ski and snowboard edges.
This file is a standard file that is absolutely necessary for every self-ski service.
Body file for removing rough base damage, pre-grinding edges and removing excess material during base repair. -
- Size: 100mm x 30mm
- Cut: 9TPI
Note: Suitable für Semi Edger edge grinder!
Rough file with proven World Cup record for pre-grinding of ski and snowboard edges. -
- Professional diamond file for finishing ground ski and snowboard edges
- Ideal for polishing and hardening steel edges
Diamond file for finishing ground ski and snowboard edges. Ideal for polishing and hardening steel edges.
Suitable for Steel Edge Worldcup (Art. 24475), Profi Edger (Art. 24497), World Cup File Guide and Semi Edger (Art. 24496). -
- Optimal for all conventional ski bases
- Light the candle, drip on the wax, and done.
- Contains: 5 pcs
Special candles for small base repairs.
-
- Contains: 305gr (250ml) - 59,60 Euro pro 1L
- Suitable for membrane textiles (e.g. GORE-TEX®), synthetic fillers (e.g. Thinsulate, Thermolite, Primaloft) and elastic fabrics (e.g. soft shell, fleece)
- Preserves their breathability
- Strongly water and dirt repellent Lotus effect
- ...
HighTec waterproofing agent for all fabric and leather types!
It provides the fibres with a coating but does not seal them – therefore the breathable properties are preserved.
Holmenkol Hightec proof is suitable for all functional textiles such as Goretex®, Sympatex®, Schoeller® etc. but also for softshell, fleece, microfibre as well as for nano-technology clothing and leather shoes or gloves.
The result: No need ever to get wet again! -
This set at a SPECIAL PRICE includes:
- Wax case (small)
- 3 shots Liquid Yellow, Red, Blue 3x100 ml
- 20 pieces Holmenkol CareFleece
- Finish cork
The Holmenkol Liquid Set "Basic" offers you all wax and care products in a handy case and at a special price, which enable an optimal and competition-ready preparation of your ski & board bases.
-
- Contains: 500ml - 43,80 Euro pro 1L
- Environmentally friendly spray impregnation
- Can be used on all membrane textiles
- Impregnates against moisture and dirt
- Maintains the breathability of all membranes
- Water and dirt repellent
- ...
Fluorine-free universal impregnation for functional clothing and footwear.
Can be used on all membrane textiles (e.g. GORE-TEX®)* and synthetic fillings (e.g. Thinsulate, Thermolite, Primaloft) and elastic fabrics (e.g. softshell, fleece). Especially recommended for glove & shoe care, also suitable for leather!
Easy application: Spray on, let dry, done! -
- Handy „all in one“ solution in a pocket format
- With integral sponge applicator and polishing felt
- Gives optimal gliding properties and provides base care
- Fast and easy application
- Biodegradable
- Contains: 100ml/98gr
Biodegradable, universal liquid wax for all snow types and temperatures.
-
- Tube with integral sponge applicator
- Gives optimal gliding properties and provides base care
- Fast and easy application
- Biodegradable
- Contains: 75ml/72gr
Biodegradable, universal ski wax paste for all snow types and temperatures.
-
- Contains: 305gr (250ml) - 51,60 Euro pro 1L
- Gentle, deep cleaning thanks to high quality care agents
- Cleans breathable sportswear with care
- Minimizes odors on all sport garments
- Preserves the characteristic features of natural fibres (natural moisture transport, odour control, natural UV protection)
Gentle special washing agent for down garments/sleeping bags and high quality wool and merino clothing.
-
- Dimensions: 125 mm x 60 mm
Extra-sharp, durable Nirosta blade. Optimally suitable for edge tuning and working surfaces.
For base repairing or wax removing from the base.