Skiboot tuning & fitting equipment

ZipFit Liner - the number 1 on the North American market now also available at our "Headquarters of Fun"!

With the ZipFit Liner, handmade in Italy, hand-sewn with the highest quality materials and the patented OMFit cork filling, we can offer you the most flexible, longest-lasting and best solution for fit problems in your ski boot.

• You can feel the liner and the fit directly when trying it on
• You can readjust the shoe afterwards (together with us or on your own!), once it has been fitted
• And all this without producing a huge mountain of rubbish and hazardous waste with the PU foam
• Ski up to 1000 days in different ski boots with only one inner boot!
• Recommended last width of the ski boot: approx. 100mm +/-2mm
  - Piste, freestyle, all-mountain and freeride boots - Snowboard Hardboots

ZipFit Liner - the number 1 on the North American market now also available at our "Headquarters of Fun"!

With the ZipFit liner, handmade in Italy, hand-sewn with the highest quality materials and the patented OMFit cork filling, we can offer you the most flexible, durable and best solution for fit problems, especially with touring boots.

• You can feel the liner and the fit directly when trying it on
• You can readjust the shoe afterwards (together with us or on your own!), once it has been fitted
• And all this without producing a huge mountain of rubbish and hazardous waste with the PU foam
• Ski up to 1000 days in different ski boots with only one inner boot!
• Recommended last width of the ski boot: 99mm +/- 2mm
  - Touring, Freeride and Hybrid Boots

• One tube of OMfit Cork Flow Composite - can be added via the OMfit ports on ZipFit liners
• For lasting and reversible fit corrections
• Scope of delivery: 1 tube of OMfit Cork

Imagine this: Throw a cork on the ground and what happens? It bounces back. Throw a piece of EVA foam on the floor. What happens? The impact is absorbed and then there's a sad piece of foam on the floor.
Cork is not only a natural, regenerative material, it is also incredibly reactive and has a higher elasticity and malleability than foam.
And this is precisely the principle of OMfit cork, which you can also fill into your Zipfit inner shoe!
So you can fit the shoe exactly where you need more material - in the heel and ankle area and/or in the tongue.
Oh yes: And you can take it out again - you can even reuse the Cork.
Kind of clever, isn't it?

C.A.S. the fit miracle for inner shoes now also as a replacement part for all other shoe brands!

"Do you also foam ski boots"?
A question we hear from time to time - our answer to that is simple - we do, of course, if all the other options we offer absolutely don't work - but with the TECNICA C.A.S. inner boot we can usually solve the problems better, more sustainably and with higher quality!

• Professional check of your current ski boot (if already available)
• Pre-fitting of the ski boot shell for perfect fitting in the Sport65 Boot LAB
• Up to 2x touch-up in case of pressure points on the shell
• Shin or span problems: Can be solved quickly and effectively by replacing the tongue with the Tecnica C.A.S. tongue (extra!)
• Please note the required last width in the order process!

Im Sport65 inklusive:

• Customized Sport65 High Performance 3D Einlage (99,90 Euro)
• Teko Race Compression Socken (39,90 Euro)
• Pre-Fitting der Skischuhschale für perfekten Schäumvorgang im Sport65 Boot LAB
• Schäumen durch das Sport65 Boot LAB Team
• Bis zu 2x Nachbesserung bei Druckstellen an der Schale

Bei uns steht ganz klar Kraftübertragung und Performance im Fokus - daher gehen wir hier komplett anders vor, als andere Händler: Wir suchen nach dem Schuh, der am besten an deinem Fuss anliegt - denn unser Credo ist: Wenig Schaum, viel Performance, denn das ist haltbarer und schlichtweg: besser!

Shin pressure pain, "shin bang", pressure pain on the instep: safe and sustainable solution!

The CAS tongue can be perfectly adapted to the shape of the skier's shin by thermoforming, thus avoiding painful pressure points and significantly increasing performance and power transmission.
In addition, in case of pressure pain at the instep, the material can simply be milled out.

It can be fitted to all liners whose tongue is attached with a Velcro fastener (which should be the case with high-end ski boots anyway) and can therefore also be fitted and adapted to many liners from other manufacturers.
With Nordica and Tecnica models this works almost everywhere without any problems.

Whether the system works with your boot (if you already have a good ski boot and only want to work on the fitting): We can tell you as soon as we see your ski boot.
On a high-quality Tecnica or Nordica liner: it works 100% for sure!

• 100% individualisation of the insole to your foot
• 100% customisation of the insole to your body weight
• 100% optimisation of the shoe for your type of sport
• 100% support of your individual foot shape instead of correction
• 100% "Swiss made": Your customised insoles are manufactured entirely in Givisiez, Switzerland
• Once scanned, always reproducible and optimisable for other sports
• Attention: Cannot be ordered online, please make an appointment with us
• ...

Individual precision, Swiss made, thanks to the latest technology in running shoes, ski boots, hiking boots, bike shoes, tennis shoes,...
100% Fit • 100% Function • 100% You • 100% Individualised • 100% Swiss Made!

• Totally 3D fitted footbed for maximum control
• Stability for the arch of foot
• Warmer feet due to soft surface
• More power transmition to the ski edges
• More feeling for the snow surface
• Including adjustment to the own arch
• ...

The Customized Sport65 High Performance 3D inlay is a pure 3D fitting inlay with warm surface and super fitting. We combined all our experience and developed this new and super performing inlay system.

• Footbed for more comfort
• Stability for the arch of foot
• Better blood circulation
• More power transmition in the boot
• More performance on the ski edges
• Including adjustment to the own arch

Pain on your feet, presure marks on your toes, aching and numb feet in your skiboots or sport shoes are relicts of the past!

• Footbed for more comfort
• Stability for the arch of foot
• Better blood circulation
• More power transmition in the boot
• More performance on the ski edges

Pain on your feet, presure marks on your toes, aching and numb feet in your skiboots or sport shoes are relicts of the past!

• Stops pain in the shin and instep
• Fits snugly to the cuff and prevents heel lift
• Helps skiers come out of a reclined position
• Reduces muscle fatigue
• Prevents "black toes
• SMALL size fits a 22.0 - 25.0 MP boot LARGE size fits a 25.5 + MP boot
• Scope of delivery: 2 tongues, velcro pads

The custom solution for bootfitters with frequent fit and performance problems in the ski boot!
Provides immediate pain relief and performance enhancement. High quality EVA material with tapered edges for maximum comfort and easy adjustment.
This simple but effective tool provides a comfortable fit for the foot in the heel, allowing skiers and snowboarders to ski better instantly! The tongue attaches to the boot tongue in seconds with the included Velcro pads and quickly adjusts during wear.

• Size: One size fits all - easy to cut to size
  
• Installation: Simply cut to the right length, spread the shoe a little and glue it to the lower part of the overlapshell with a super glue
  Done!
• Contains: 2 Waterstop sealing lips (right & left)

You know the problem? Wet feet due to water/snow penetrating the ski boot.
This is not due to a faulty construction of your boot, but either due to the hard plastic (e.g. with racing boots with high flex), but can also be due to the fact that the boot does not close properly on your foot over the instep.
This causes fine snow dust (which happens primarily on artificial snow or at very cold temperatures) to press between the overlap, which then melts due to the warmth of the foot (or e.g. in the hut).
Result: wet, cold feet...
The Waterstop sealing lip eliminates this problem simply, sustainably and economically.

Works with all ski boots from all brands!
 

Used by at least 80% of all World Cup skiers! Maximum performance for your ski boot!

• Recommended rider weight: from 45-75kg
• Straps with 2 elastic belts for sensitive performance

The Booster Strap is the essential element for improving ski boot performance.
When used properly, the Booster Strap provides maximum performance and exceptional control over the skis.
The Booster increases comfort and prevents shin bruises and other leg injuries.
Made of an elastic strap with a finely adjustable metal buckle, it provides the optimal connection between leg and ski boot.
The direct and elastic connection absorbs vibrations, impacts and optimally transports any movement to the ski.
No more play in the steering thanks to the Booster Strap!
The Booster eliminates the gap between the shin and the ski boot tongue and in this way absorbs shocks.

Used by at least 80% of all World Cup skiers! Maximum performance for your ski boot!

• Recommended rider weight: from 70-90kg
• Straps with 3 elastic belts for medium performance

The Booster Strap is the essential element for improving ski boot performance.
When used properly, the Booster Strap provides maximum performance and exceptional control over the skis.
The Booster increases comfort and prevents shin bruises and other leg injuries.
Made of an elastic strap with a finely adjustable metal buckle, it provides the optimal connection between leg and ski boot.
The direct and elastic connection absorbs vibrations, impacts and optimally transports any movement to the ski.
No more play in the steering thanks to the Booster Strap!
The Booster eliminates the gap between the shin and the ski boot tongue and in this way absorbs shocks.

Used by at least 80% of all World Cup skiers! Maximum performance for your ski boot!

• Recommended rider weight: from 70-90kg
• Straps with 3 elastic belts for medium performance

The Booster Strap is the essential element for improving ski boot performance.
When used properly, the Booster Strap provides maximum performance and exceptional control over the skis.
The Booster increases comfort and prevents shin bruises and other leg injuries.
Made of an elastic strap with a finely adjustable metal buckle, it provides the optimal connection between leg and ski boot.
The direct and elastic connection absorbs vibrations, impacts and optimally transports any movement to the ski.
No more play in the steering thanks to the Booster Strap!
The Booster eliminates the gap between the shin and the ski boot tongue and in this way absorbs shocks.

Used by at least 80% of all World Cup skiers! Maximum performance for your ski boot!

• Recommended rider weight: from 85kg
• Straps with 5 elastic belts for maximum performance and pressure

The Booster Strap is the essential element for improving ski boot performance.
When used properly, the Booster Strap provides maximum performance and exceptional control over the skis.
The Booster increases comfort and prevents shin bruises and other leg injuries.
Made of an elastic strap with a finely adjustable metal buckle, it provides the optimal connection between leg and ski boot.
The direct and elastic connection absorbs vibrations, impacts and optimally transports any movement to the ski.
No more play in the steering thanks to the Booster Strap!
The Booster eliminates the gap between the shin and the ski boot tongue and in this way absorbs shocks.

• Fits all Lange RX, RS and XT models
• Set includes straps and screw
• Size M/L for shoes 26.5-29.5 Mondopoint
• Contains: 2 pieces

The Lange Strap with Velcro closure suitable for all RX, XT and RS Lange ski boots.
More performance and feel due to the more flexible strap band on the shaft, better to dose power transmission for more control!
The direct connection absorbs vibrations, shocks and transports any movement optimally on the ski.
No more play in the steering thanks to the Performance Strap.
Note: The straps also fit to other skiboot brands with one fixation hole!

• Fits all Lange RS, RX und XT models
• Set includes straps, metal buckle and screw
• One size fits all (boot sizes...)
• Contains: 2 pieces

Spare part fits all Lange RX, XT and RS models.
Provides more power and precission!
Dynamic strap, super tight for an increase in performance. Your stock power strap doesn't lock you in like a Booster Strap for an insanely tight closure.
They also provides cushioning to keep your shins from bangin' when you're getting ultra-sendy, too.
Note: The straps also fit to other skiboot brands with one fixation hole!

• Strap incl. screws, Full Contact booster and Power Lock hook
• Sizes: S = 24-26, M = 26-28, L 28-30 Mondopoint
• Contains: 2 straps, screws, inserts and power lock hooks

The best performance strap on the market! Pimp your ZeroG boot into a new performance league - simply remove the light strap (drill out the rivets) and attach the power strap with the included screws and inserts: Increases performance many times over!
The Tecnica Strap also fits all Tecnica models such as Mach1, Mach Sport and all Cochise.
The direct connection absorbs vibrations, impacts and transports any movement optimally onto the ski.
No more play in the steering thanks to the Booster Strap.
It also fits models from other manufacturers, as the enclosed screw sets can be easily fitted into new holes.

The original World Cup construction, elastic and easily mountable on all shoes through various pre-punched holes.
Maximizes performance and skiing feel by up to 30%!

• Elastic Power-Booster Strap incl. screws and Power Lock hooks
• Sizes: One size fits all - can be mounted precisely matched through various holes
• Recommended rider weight: up to 95kg
• Contains: 2 straps, screws, inserts and power lock hooks

The legitimate replica of the original Booster Straps from Tecnica!
Due to its elasticity, a Booster Strap offers the best performance strap on the market! Pimp your ski boot - whether race boot, freeride boot or touring boot into a new performance league - The direct connection absorbs vibrations, shocks, prevents shin bruises and transports any movement optimally on the ski.
It is made of an elastic strap and finely adjustable with the patented Tecnica Power Lock hook.
No more play in the steering thanks to Booster Strap!
Oh yes: The Tecnica Booster fits but also on models of other manufacturers, because the enclosed screw sets can be easily fitted into new holes - Also mountable on boots with only one mounting hole.

The original World Cup construction, elastic and easily mountable on all shoes through various pre-punched holes.
Maximizes performance and skiing feel by up to 30%!

• Elastic Power-Booster Strap incl. screws and Power Lock hooks
• Sizes: One size fits all - can be mounted precisely matched through various holes
• Recommended rider weight: from 85kg
• Contains: 2 straps, screws, inserts and power lock hooks

The legitimate replica of the original Booster Straps from Tecnica!
Due to its elasticity, a Booster Strap offers the best performance strap on the market! Pimp your ski boot - whether race boot, freeride boot or touring boot into a new performance league - The direct connection absorbs vibrations, shocks, prevents shin bruises and transports any movement optimally on the ski.
It is made of an elastic strap and finely adjustable with the patented Tecnica Power Lock hook.
No more play in the steering thanks to Booster Strap!
Oh yes: The Tecnica Booster fits but also on models of other manufacturers, because the enclosed screw sets can be easily fitted into new holes - Also mountable on boots with only one mounting hole.

The original World Cup construction, elastic and easily mountable on all shoes through various pre-punched holes.
Maximizes performance and skiing feel by up to 30%!

• Elastic Power-Booster Strap incl. screws and Power Lock hooks
• Sizes: One size fits all - can be mounted precisely matched through various holes
• Recommended rider weight: up to 95kg
• Contains: 2 straps, screws, inserts and power lock hooks

The legitimate replica of the original Booster Straps from Nordica!
Due to its elasticity, a Booster Strap offers the best performance strap on the market! Pimp your ski boot - whether race boot, freeride boot or touring boot into a new performance league - The direct connection absorbs vibrations, shocks, prevents shin bruises and transports any movement optimally on the ski.
It is made of an elastic strap and finely adjustable with the patented Nordica Power Lock hook.
No more play in the steering thanks to Booster Strap!
Oh yes: The Nordica Booster fits but also on models of other manufacturers, because the enclosed screw sets can be easily fitted into new holes - Also mountable on boots with only one mounting hole.

• Fits all Tecnica Mach1 or Cochise models
• Fits all Nordica Speedmachine or Promachine models
• Fits all sizes
• Several plates can also be combined to get more angles*
• Scope of delivery: 1 set of 0.5° plates, screws included

If the shaft canting screw is not enough, or you need the 100% neutral position for bow legs or knock knees, these plates are mounted between the shell and the heel plates.
*The boot may then have to be reground for the binding height - we can do this work for you at the Sport65 Boot LAB!

• Fits all Tecnica Mach1 or Cochise models
• Fits all Nordica Speedmachine or Promachine models
• Fits all sizes
• Several plates can also be combined to get more angles*
• Scope of delivery: 1 set of 1° plates, screws included

If the shaft canting screw is not enough, or you need the 100% neutral position for bow legs or knock knees, these plates are mounted between the shell and the heel plates.
*The boot may then have to be reground for the binding height - we can do this work for you at the Sport65 Boot LAB!

• Fits all  Lange RS models without removable sole
• Fits all Rossignol Racing models without removable sole
• Fits all sizes
• Lange product code: LVLLZ60
• Scope of delivery: 2x forefoot, 2x heel, incl. screws

Lifter plates set for original race boots without exchange soles from Lange and Rossignol - protect against excessive wear and result in the FIS approved stance height for more edge angle and pressure.
Attention: The height with mounted lifters does not correspond to the ISO standard 5355 - after mounting the boot must be ground to the appropriate standing height!
We can do this work for you in the Sport65 Boot LAB (extra!).

• Contains: 1 complete set of screws (1 boot)

Sometimes it happens... that the canting screw of your Tecnica boot gets lost.
The screw set fits on the OUTSIDE and INSIDE of the Mach1 MV & LV models (men's and women's!).

• Contains: 1 complete set of screws (1 boot)

Sometimes it happens... that the canting screw of your Tecnica boot gets lost.
The screw set fits on the OUTSIDE and INSIDE of the Mach1 HV models (men's and women's!).

• Contains: 1 complete set of screws (1 boot)

Spare part fits the outer side of all Lange XT3 models (not XT Free!).

• Contains: 1 complete set of screws (1 boot)

Spare part fits the outside of all Lange RX, LX, SX, RS and XT Free models.

• Contains: 1 complete set of screws (1 boot)

Spare part fits the inner side of all Lange RX, LX, SX, and RS models.

• Original C.A.S. Tuning Parts
• Easy to apply to almost all inner shoes
• Suitable for all sizes
• Scope of delivery: 2x complete set for liners
  & 2-component adhesive for firm attachment

Get more custom fit out of your ski boot - more heel hold, ankle hold, more projection or space at the toes - with the original C.A.S. parts from Tecnica you can "pimp" your Tecnica Customized liner from the Mach1 or Cochise - or in whichever boot you have it installed - into new spheres - also fits on many liners from other manufacturers. Or we can do this work for you in our Boot LAB!

• Size: One size fits all!
• Adhesive pads are glued to the inside of the inner shoe or the back of the inner shoe
• Scope of delivery: Cuff Adapt Booster
  & 2-component adhesive for firm attachment

With this Tecnica C.A.S. Cuff Adapt Volume Reducer booster spoiler you can reduce the calf circumference of your ski boot, take out volume to optimise the fit and achieve more submission.
The adhesive pads are for those inner boots where you don't have Velcro at the back and are simply glued either to the calf of the inner boot or into the shaft of the shell. A special 2-component adhesive for stable mounting is included.
Works on boots from any brand!
 

• Size: One size fits all
  
• Installation: Very simple via a Velcro fastener that holds on to the material of the liner
  (Prerequisite: Liner must have textile material in the rear shaft/calf area)
• Contains: 2 booster pieces (left & right)

Just fix this booster spoilers on the backside of your liner to gain less volume, more front lean and more contact to your skiboots.
Simply to fix with a velcro on the textile material of your liner.
Works on boots from any brand!
 

• Size: One size fits all
  
• Installation: Very simple via a Velcro fastener that holds on to the material of the liner
  (Prerequisite: Liner must have textile material in the rear shaft/calf area)
• Contains: 2 booster pieces (left & right)

Just fix this booster spoilers on the backside of your liner to gain less volume, more front lean and more contact to your skiboots.
Simply to fix with a velcro on the textile material of your liner.
Works on boots from any brand!
 

• One size fits all, easily adjustable
• Flexible and resistant rubber
• Facilitates walking with ski boots
• Protects the outer sole of the ski boot from running off
• Scope of delivery: 2 pieces Ski Boot Traction

With Sidas ski boot traction devices, you can walk safely and without slipping on the snow with your ski boots. They also protect the soles of your ski boots from excessive wear and considerably increase the life of your boots.
Their bevelled shape at the ends makes it easier for the foot to roll off, while the asymmetrical groove tread guarantees safe walking on snow.
Individually adaptable to the size of different ski boots.

• One size fits all, easily adjustable
• Flexible and resistant rubber
• Facilitates walking with ski boots
• Protects the outer sole of the ski boot from running off
• Scope of delivery: 2 pieces Ski Boot Traction

With Sidas ski boot traction devices, you can walk safely and without slipping on the snow with your ski boots. They also protect the soles of your ski boots from excessive wear and considerably increase the life of your boots.
Their bevelled shape at the ends makes it easier for the foot to roll off, while the asymmetrical groove tread guarantees safe walking on snow.
Individually adaptable to the size of different ski boots.

• One size fits all, easily adjustable
• Flexible and resistant rubber
• Facilitates walking with ski boots
• Protects the outer sole of the ski boot from running off
• Scope of delivery: 2 pieces Ski Boot Traction

With Sidas ski boot traction devices, you can walk safely and without slipping on the snow with your ski boots. They also protect the soles of your ski boots from excessive wear and considerably increase the life of your boots.
Their bevelled shape at the ends makes it easier for the foot to roll off, while the asymmetrical groove tread guarantees safe walking on snow.
Individually adaptable to the size of different ski boots.

• Spare part fits all Lange RS (100mm last!), RX, LX and SX models
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

By converting the standard pre-mounted GripWalk soles on the Lange alpine models, you can convert the skiboot so that it officially fits in a race binding (without Gripwalk).
Thus, these models also meet the ISO 5355 standard and also officially fit in all safety bindings.

• Spare part fits all Lange Shadow models
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

By converting the standard pre-mounted GripWalk soles on the Lange alpine models, you can convert the skiboot so that it officially fits in a race binding (without Gripwalk).
Thus, these models also meet the ISO 5355 standard and also officially fit in all safety bindings.

• Fits on all XT models from year 2018 on WITH archpad and Dynafit inserts!
• Item number Lange: LVHLZEO
• One size fits all!
• Contains: 1 Pair of GripWalk sole blocks ISO 23223 (2 toe, 2 heel parts, screws not included)

GRIPWALK® sole kit for LANGE XT (with Dynafit® inserts) boot models.
GRIPWALK® soles feature a thick rubber tread and convex toe profile, offering increased traction and more natural foot roll for enhanced hiking and walking comfort. Integrated stiff pads guarantee optimized power transmission. Gripwalk compatible binding needed for alpine use.

• Fits on all XT3 models
• Item number Lange: LVHLAO0
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

Alpine Sole Kit for LANGE XT3 boot models (with Dynafit® inserts). By converting the standard pre-mounted GripWalk soles on the XT3, you can convert the skiboot so that it officially fits in a race binding (without Gripwalk).
Thus, these models also meet the ISO 5355 standard and also officially fit in all safety bindings.

• Suitable for Nordica Handsfree models (men and women)
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

By converting the standard pre-mounted GripWalk soles on the Nordica Handsfree (HF) models, you can convert the skiboot so that it officially fits in a alpine binding (without Gripwalk).
Thus, these models also meet the ISO 5355 standard and also officially fit in all safety bindings.

• Suitable for Nordica Handsfree models (men and women)
• One size fits all!
• Contains: 1 Pair of GripWalk sole blocks ISO 23223 (2 toe, 2 heel parts, screws not included)

GRIPWALK® Sole Kit for Nordica Handsfree (HF) models ladies and men. The thick rubber sole and the curved toe profile of the GRIPWALK® soles provide improved traction and a natural rolling of the foot and thus more comfort in the ascent and when walking, the integrated stiff pads guarantee optimal power transmission.
A Gripwalk-compatible binding is required for use.

• Fits on all Tecnica Cochise models with integrated Dynafit Tech inserts
• Fits all Nordica Strider models
• Also fits ZeroG models with changeable sole
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

Super easy to change Alpine sole blocks for all Tecnica Cochise models with integrated Dynafit inserts and Nordica Strider.
Fits all sizes - also fits ZeroG models with changeable sole.
Works in all Alpine & GripWalk bindings and all frame tour bindings like Marker Duke, Baron, Tour, Salomon Guardian, Look XM, Fritschi.

• Fits on all Tecnica Cochise models with integrated Dynafit Tech inserts
• Fits on all Nordica Strider models
• Also fits ZeroG models with changeable sole
• Profiled PUsole, toe and heel
• One size fits all!
• Contains: 1 Pair of GripWalk sole blocks ISO 23223 (2 toe, 2 heel parts, screws not included)

Super easy to change PU GripWalk sole blocks for all Tecnica Cochise models with integrated Dynafit inserts and Nordica Strider.
Fits all sizes - also fits ZeroG models with changeable sole.
Works in all GripWalk alpine bindings and all frame tour bindings like Marker Duke, Baron, Tour, Salomon Guardian, Look XM, Fritschi.

• Fits on all Tecnica Cochise models with integrated Dynafit Tech inserts
• Fits on all Nordica Strider models
• Also fits ZeroG models with changeable sole
• Profiled Vibram sole, toe and heel
• One size fits all!
• Contains: 1 Pair of GripWalk sole blocks ISO 23223 (2 toe, 2 heel parts, screws not included)

Super easy to change Vibram GripWalk sole blocks for all Tecnica Cochise models with integrated Dynafit inserts and Nordica Strider.
Fits all sizes - also fits ZeroG models with changeable sole.
Works in all GripWalk alpine bindings and all frame tour bindings like Marker Duke, Baron, Tour, Salomon Guardian, Look XM, Fritschi.

• For all Tecnica Cochise models
• For Tecnica ZeroG models with exchangeable soles
• One size fits all!
• Contains: 1 Pair of touring sole blocks ISO 9523 (2 toe, 2 heel parts, screws not included)

Replacement or exchange sole plates for all Tecnica Cochise models and ZeroG models with exchangeable soles.
Especially when entering a pin binding with a Cochise, you can make it much easier for yourself by changing to the touring sole.
You may have to cut off a small piece of rubber at the heel (depending on the model) - but this is easy and does not restrict the function.
This way you can convert a "freeride" Cochise into a "touring" Cochise in no time!

• Fits on all Tecnica Mach1 & Mach Sport models
• Fits on al Nordica Speedmachine, Sportmachine, Promachine
• Fits also Tecnica Cochise models from model 2016/17 on (without DYN!)
• Profiled rubber sole, toe and heel
• One size fits all!
• Contains: 1 Pair of GripWalk sole blocks ISO 23223 (2 toe, 2 heel parts, screws not included)

Very simple and fast to change - fits on all Tecnica Mach1 and Mach Sport models and all Nordica Machine models.
Fits also on Tecnica Cochise models without Dynafit inserts from model 2016/17.
Works in all GripWalk bindings and all frame tour bindings like Marker Duke, Baron, Tour, Salomon Guardian, Look XM, Fritschi.

• Fits on all Tecnica Mach1 & Mach Sport models
• Fits on al Nordica Speedmachine, Sportmachine, Promachine
• Fits also Tecnica Cochise models from model 2016/17 on (without DYN!)
• One size fits all!
• Contains: 1 Pair of alpine sole blocks ISO 5355 (2 toe, 2 heel parts, screws not included)

Very simple and fast to change - fits on all Tecnica Mach1 and Mach Sport models and all Nordica Machine models.
Fits also on Tecnica Cochise models without Dynafit inserts from model 2016/17.
Works in all Alpine bindings and in all GripWalk bindings as well as all frame tour bindings like Marker Duke, Baron, Tour, Salomon Guardian, Look XM, Fritschi.

• Fits on all Tecnica Cochise and Mach1 models with Power Lock strap
• Contains: 2 hooks (strap not included!)

• Contains: 6 pieces, 4.4 x 7cm, self-adhesive
• Reduces friction - prevents blisters in ski boots, running shoes, hiking boots
• Easy to apply in the shoe
• Ultra-thin and self-adhesive
• Sweat resistant and waterproof

To protect against blisters on the heel, ankle, toes and ball of the toe as well as on the edges of the foot.
The blister stoppers can be individually cut to size and are stuck directly into the shoe (or inner shoe).
Wherever blisters can form in the shoe, you can permanently apply an effective sliding layer to reduce friction - directly in the shoe instead of on the skin!

• Contains: Twist stick with 22gr content (base price: 72,23 € / 100gr)
• Protection against blisters and friction through specially developed balm
• Optimal, long-lasting blister protection when hiking, running, ski touring,...
• Simply apply directly to the stressed skin areas
• Footgllide is waterproof and sweat-resistant

The transparent balm provides long-lasting protection against friction and blisters when running, hiking, ski touring or mountaineering.
Added vitamins nourish and are anti-inflammatory - especially during heavy use. The Footgllide is waterproof and sweat-resistant and offers the best skin compatibility thanks to purely plant-based ingredients.
Vitamin A and vitamin C care for the skin and provide preventive treatment. Dry, chapped skin is gently supplied with moisture.

• Contains: Twist stick with 42gr content (base price: 42,62 € / 100gr)
• Absorbs very quickly, does not stick or smear
• Leaves no residue
• Abrasion resistant and long lasting
• Odourless and well tolerated
• Protects even in water and during heavy sweating

The skin protection balm reliably protects you from friction, skin irritations, blisters and abrasions caused by clothing, straps, shoes and other things. Ideal for sports, hiking, running, ski touring,...
The balm forms a dry, invisible protective film that works better than that of other products such as creams, gels, powders or lotions. Simply apply to the skin before putting on clothes and shoes, especially along the outlines of the bra, on the thighs and on all other sensitive areas of the skin.

• Contains: 2 complete pieces
• 2 sizes (S fits up to bootsize 26,5)

Tuning for your feet! Perfect grip, more performance!
The stable Booster for an increased heel grip in ski- or snowboard boots are super easy to mount.
The system helps you to minimize a "slip out" of your heel.
Simply put around your liner to get more heel grip due to less volume and more stbility.
More heel grip = more control!

• Thickness: 4mm
• Contains: 2 pieces, self adhesive

Tuning for your feet! Perfect heel hold and fit!
The raised heel post can prevent ankle pain and allows many skiers to have a much better heel hold and more support in the ski boot! It also often reduces pressure pain in the instep.
The self-adhesive pads are simply attached between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the liner of your boot.

• Thickness: 6mm
• Contains: 2 pieces, self adhesive

Tuning for your feet! Perfect heel hold and fit!
The raised heel post can prevent ankle pain and allows many skiers to have a much better heel hold and more support in the ski boot! It also often reduces pressure pain in the instep.
The self-adhesive pads are simply attached between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the liner of your boot.

• Thickness: 6mm
• Contains: 2 pieces, self adhesive

Tuning for your feet! Perfect heel hold and fit!
The soft raised heel post can prevent ankle pain and allows many skiers to have a much better heel hold and more support in the ski boot! It also often reduces pressure pain in the instep.
The self-adhesive pads are simply attached between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the liner of your boot.

• Thickness: 5mm
• Soft gel insole under the heel bone
• Contains: 2 pieces, self adhesive

5 mm heel wedge with additional gel insert for optimal cushioning - especially for freeriding or touring, these pads offer more comfort and safety. This additional cushioning helps in difficult conditions, when walking or landing jumps.
The heel elevation in the heel area can prevent ankle pain and enables many skiers to have a much better heel hold in the ski boot!
The pads are simply placed between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the inner boot - they can also be fixed with double-sided adhesive tape.

• Thickness: 5mm
• Contains: 2 pieces, self adhesive
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint

Tuning for your feet! Perfect heel hold and fit!
The raised heel post can prevent ankle pain and allows many skiers to have a much better heel hold and more support in the ski boot! It also often reduces pressure pain in the instep.
The self-adhesive pads are simply attached between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the liner of your boot.

• Thickness: 9mm
• Contains: 2 pieces, self adhesive
• Sizes: 23-30 Mondopoint (just cut it on the fitting size)

Tuning for your feet! Perfect heel hold and fit!
The raised heel post can prevent ankle pain and allows many skiers to have a much better heel hold and more support in the ski boot! It also often reduces pressure pain in the instep.
The self-adhesive pads are simply attached between the inner boot and the outer boot (on the so-called bootboard) or under the insole in the liner of your boot.

• Contains: 2 pieces
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
  (just cut to the perfect size!)

Volume reducer parts, simply put on the bootboard, between bootboard and liner!
These self sticking volume reducer helps to reduce the volume inside your skiboot!
Less volume = more control!

• Contains: 2 pieces
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
  (just cut to the perfect size!)

Volume reducer parts, simply put on the bootboard, between bootboard and liner!
These self sticking volume reducer helps to reduce the volume inside your skiboot!
Less volume = more control!

• Contains: 2 pieces 
• Black: Softer version, more comfort & cushion
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
• Note: We recommend to secure pads with tape after adhering pads to boot liner.

Self sticking reducer parts, simply put around your liner to get more heel grip due to less volume.
More heel grip = more control!

• Contains: 2 pieces 
• Black: Softer version, more comfort & cushion
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
• Note: We recommend to secure pads with tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the rear part of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces 
• Red: Harder and ribbed version, better grip
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
• Note: We recommend to secure pads with tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the rear part of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces
• Black: Softer version, more comfort & cushion
• 5mm, self adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the ankle area of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces
• Red: Harder and ribbed version, better grip
• 5mm, self adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the ankle area of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces, self-adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

More heel support and cushioning for pressure points in the ankle area!
The Sidas IPS C Shape foam pads are a simple solution for skiers who do not have enough heel support (and therefore blisters on the heel!) and want to reduce the volume in this area of the ski boot - or have strong pressure points that can be dampened with them.
By reducing the volume, ski boots that are too wide (or even too big) can be tuned afterwards to achieve better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces, self-adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

More heel support and cushioning for pressure points in the ankle area!
The Sidas IPS Donut-Shape foam pads are a simple solution for skiers who do not have enough heel support (and therefore blisters on the heel!) and want to reduce the volume in this area of the ski boot - or have strong pressure points that can be dampened with them.
By reducing the volume, ski boots that are too wide (or even too big) can be tuned afterwards to achieve better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces
• Black: Softer version, more comfort & cushion
• 5mm, self adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the ankle area of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces
• Red: Harder and ribbed version, better grip
• 5mm, self adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

Tuning for your feet! Perfect heel hold and fit!
The self-adhesive pads are simply attached to the ankle area of the inner boot.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 1x complete plate - if you want to tune both shoes, you may need 2 plates!
  Different parts for all parts of the shoe
• Red: Harder and ribbed version, better grip
• 5mm, self adhesive
• Note: It's recommended to secure pads with duct tape after adhering pads to boot liner.

Tuning for your feet! Create your perfect ski boot!
You can simply remove the self-adhesive pads from the mat and attach them to the inner boot where you want more support and performance.
By reducing the volume, ski boots that are too wide (or too big) can be tuned afterwards for better heel hold, more control and better power transmission.

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Contains: 2 pieces 
• Sizes: S = 23-26 Mondopoint, L = 27-30 Mondopoint
• Note: We may recommend fixing the self-adhesive pads again with strong adhesive tape.

Tuning for your feet! Less pressure pain, more performance!
The self-adhesive pads are simply attached to the outside of the tongue of the inner shoe (possibly easy to cut to size).
Through this volume reduction, or cushioning, shin pressure points or too much volume in the upper (due to calves that are too narrow in relation to the shoe size) can be corrected quickly and easily. More control and better power transmission can be achieved through this.

• Contains: 2 pieces & spoiler covers for better attachement

Tuning for your feet! Less pressure pain, more performance!
The self-adhesive pads are simply attached to the outside of the tongue of the liner from your skiboot (possibly easy to cut to size).
Tongue Spoilers are useful additions in getting ski boot fitted properly. Positioned on the outside of the inner boot tongue they remove excess volume from the lower area without altering the natural forward lean of the boot, as well as increasing shock absorption and avoiding the shin bang syndrome.
Through this volume reduction, or cushioning, shin pressure points or too much volume in the upper (due to calves that are too narrow in relation to the shoe size) can be corrected quickly and easily. More control and better power transmission can be achieved through this.

Make an appointment in our  Sport65 Boot LAB,  because for perfect fit and optimal comfort we need a little time.
It's worth it!

• Contains: 10 pieces on foil, self-adhesive
  For left and right foot
• Thickness: about 5mm

Self-adhesive pads to adjust ski boots in "home work".
The self-adhesive pads are simply stuck directly onto the foot, in the places where you want space in your ski boot.
Carefully pull the ski sock over it and get into the pre-warmed inner boot, or ski boot and tighten the buckles.
The thermally adjustable inner shoe of your ski boot can be warmed up to the specified temperature in a household oven.
- Warm-up time and temperature vary depending on the model (please refer to the manufacturer's information!).
Usually thin INTUTION or Palau liners (mostly used in touring boots) approx. 6-8 minutes 120°C, thicker liners (like Tecnica CAS or Nordica liners) 6-8 minutes 80°C.

Make an appointment in our  Sport65 Boot LAB,  because for perfect fit and optimal comfort we need a little time.
It's worth it!

• Package content: 4 pads
• Very light, 3mm thin, moisturising and imperceptible silicone gel
• Washable, reusable
• Super easy to use

Pressure pain on the ankle? Open spots? Chafing from the boot?
The Gel Pads effectively relieve pain caused by pressure points and friction in the ski boots on the inner and outer ankles.
The ankle protection attached under the socks does not slip in the ski boot and can be used again and again.
Simply wash it briefly by hand with washing-up liquid - and it sticks super securely again!

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Package content: 2 pads
• Washable, reusable
• Super easy to use

Pressure pain on the shin? Open spots? Chafing from the boot?
The gel pads can be used several times, are stuck directly onto the skin (don't worry, you won't scream in pain when you take them off!), put the ski sock on, put them in your ski boot and:  No more open shins and pressure points!
They effectively relieve pain caused by pressure points on the shins in ski boots.
The shin guard attached under the socks does not slip when skiing and can be used again and again.
Simply wash it briefly by hand with washing-up liquid - and it sticks super securely again!

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

• Package content: 2 pads
• Washable, reusable
• Super easy to use

Pressure pain on the shin? Open spots? Chafing from the boot?
The Shin Protectors are sold in pairs and are specially designed to fit the shape of the shin.
They effectively relieve pain caused by pressure points in the ski boots on the shin.
The shin protector, which is attached under the socks, does not slip during skiing and can be used again and again.
Simply wash it off by hand with washing-up liquid - and it will stick securely again!

Make an appointment at our Sport65 Boot LAB, because we need a little time for a perfect fit and optimal comfort.
It's worth it!

Sizes:

• S = 22-24 Mondopoint
• M = 25-28 Mondopoint
• L = 29-31 Mondopoint
• Contains: 1 pair

BootCover Neoprene thermal insulation for ski boots.
Cover of strechy neoprene material for your skiboot liners to provide more heat, less volume and a better fitting of your skiboots.
No extra heating required - Less volume = more control!

• Power supply: 230V mains plug and 12V car adapter (included)
• Protection against overheating (max. 70°C)
• Material-friendly drying temperature for longer life of your shoes and boots
• Warms and dries ski boots, running shoes, gloves or slippers
• Optimal heat circulation

Warm and dry ski boots overnight!
The handy shoe and boot dryer for at home and on the go dries ski and snowboard boots, winter boots, street shoes, sports shoes and work boots, gloves,... efficiently and gently.
Due to the gentle drying process, the material is not attacked or deformed.
With its compact dimensions, this lightweight drying device fits in the smallest bag.
The MICRO DRY is highly flexible: you can use it overnight at home or in a hotel, or on the way to the lift or to work: Simply plug it into the 12V on-board power supply of your vehicle and preheat your shoes!