Bindings & Equipment for Freeride, Randonné & Alpine Skis
Not only buying bindings and equipment from Sport65, Germanys wintersports dealer No.1 - we also mount them in our ski workshop!
Feel free to contact our team via email, phone, whatsapp,... if you have any question...
Filter
- 1
-
- Upgrade Kit for Look Pivot 15 or 18
- Weights:
Glide plate/climbing aid: 128gr
Pin Toe Piece: 191gr
Total weight ascent: 1045gr per ski (CAST Pin toe piece, heel piece with corresponding plates, climbing aid)
Total weight descent: 1395gr per ski (Pivot toe piece, heel piece with corresponding plates, climbing aid) - Different pedestrial pairs for all boot types available
- All parts (incl. Tech Toe piece) for upgrading the Look Pivot 15 or 18 included
- No mounting charges if you buy your full skiset at Sport65
The set of Look Pivot and the CAST Freetour Upgrade Kit redefines the term “no compromise” within the touring binding world.
-
- Suitable for sole lengths 245 to 305mm
- Easy to use - adjustment is also possible with gloves
- Low additional weight: only approx. 900g/pair
- Easy to stow in the rucksack when skiing downhill
- ...
The startUp is simply clicked into the normal ski binding. It can be adjusted to the right size from 245 to 305 mm sole length in just a few steps and inserted into any normal alpine binding.
-
- DIN range: 3-8
- Recommended Riders weight: max. 90kg
- Weight: 335gr (Piece, with brake!)
- Brakes: INCLUDED! 90mm, 105mm, 115mm (selectable)
- New "Intuitive Step In" front head
- Lenght adjustment: 15 mm (+/- 7,5 mm)
- ...
The very light, ascent-oriented touring pin binding with ISI toe piece and excellent entry comfort. Made for high alpine challenges.
-
- DIN range: 6-12
- Recommended Riders weight: max. 110kg
- Weight: 335gr (Piece, with brake!)
- Brakes: INCLUDED! 90mm, 105mm, 115mm (selectable)
- New "Intuitive Step In" front head
- Lenght adjustment: 15 mm (+/- 7,5 mm)
- ...
The very light, ascent-oriented touring pin binding with ISI toe piece and excellent entry comfort. Made for high alpine challenges.
-
- DIN range: 5-10
- Recommended Riders weight: 30-100kg
- Weight: 695gr (Piece, with brake!)
- Brakes: 75-100mm or 100-125mm (selectable)
- New "Intuitive Step In" front head
- Perfect power transmission through Alpine automatic heel release
- Safety release
- ....
For the 2022/2023 season, Marker Bindings presents the new ISI toe clamp as the successor to the tried and tested two-spring toe clamp.
Lighter, more stable, easier to get into! -
- DIN range: 6-13
- Recommended Riders weight: 30-100kg
- Weight: 695gr (Piece, with brake!)
- Brakes: 75-100mm or 100-125mm (selectable)
- New "Intuitive Step In" front head
- Perfect power transmission through Alpine automatic heel release
- Safety release
- ....
For the 2022/2023 season, Marker Bindings presents the new ISI toe clamp as the successor to the tried and tested two-spring toe clamp.
Lighter, more stable, easier to get into! -
- DIN range: 5-12
- Recommended Riders weight: +50kg
- Weight: 620gr (Piece, with brake!)
- Brakes: 75-100mm or 100-125mm (selectable)
- Perfect power transmission through Alpine automatic heel release
- Safety release
- Ultra-light dual spring and toe piece comprised 30% of carbon
- ....
The Marker KingPin M-Werks impresses with its usual strong downhill performance, the ultimate style and even less weight than the standard model. As before: The Marker flagship!
-
- DIN range: 3-11
- Recommended Riders weight: +30 - 90kg
- Weight: 870gr (piece, ascent), 1250gr (piece, descent)
- Brakes: 100mm or 125mm (selectable)
- Ride & Hike toe piece technology
- Removable toe piece: saves a whopping 300 gr per foot on the ascent
- Comfortable alpine binding entry in downhill model
- ....
For the Sport65 Team: The almost perfect symbiosis of ascent and descent!
It combines the outstanding downhill and functional performance of a Jester with the ascent comfort of a Pin binding. -
- DIN range: 4-12
- Recommended Riders weight: +30 - 110kg
- Weight: 850gr (piece, ascent), 1150gr (piece, descent)
- Brakes: 100mm or 125mm (selectable)
- Ride & Hike toe piece technology
- Removable toe piece: saves a whopping 300 gr per foot on the ascent
- Comfortable alpine binding entry in downhill model
- ....
For the Sport65 Team: The almost perfect symbiosis of ascent and descent!
It combines the outstanding downhill and functional performance of a Jester with the ascent comfort of a Pin binding. -
- DIN range: 6-16
- Recommended Riders weight: +60kg
- Weight: 1050gr (Piece, Ascent), 1350gr (Piece, Descent)
- Brakes: 100mm or 125mm (selectable)
- Ride & Hike toe piece technology
- Removable toe piece: saves a whopping 300 gr per foot on the ascent
- Comfortable alpine binding entry in downhill model
- ....
For the Sport65 Team: The almost perfect symbiosis of ascent and descent!
It combines the outstanding downhill and functional performance of a Jester with the ascent comfort of a Pin binding. -
- DIN range: 6-16
- Recommended Riders weight: +60kg
- Weight: 1050gr (Piece, Ascent), 1350gr (Piece, Descent)
- Brakes: 100mm or 125mm (selectable)
- Ride & Hike toe piece technology
- Removable toe piece: saves a whopping 300 gr per foot on the ascent
- Comfortable alpine binding entry in downhill model
- ....
For the Sport65 Team: The almost perfect symbiosis of ascent and descent!
It combines the outstanding downhill and functional performance of a Jester with the ascent comfort of a Pin binding. -
- DIN range: 4-13
- Recommended Riders weight: + 50kg - ca. 120kg
- Weight: 1405gr (Piece)
- Brakes: 90-130mm (selectable)
- Easy entry like any alpine binding
- Easy switching between ride and hike function
- Multinorm - Sole. ID = is compatible with every kind of ski boot
- 2 climbing aids with 7° and 13° adjustable
- ...
With a Z value of up to 13, the Baron EPF has won a firm place among freeriders who also want the walking function for ascents.
Still: A binding with 100% raison d'être - no matter which boot you use! -
- Set up value: 3-10
- Recommended Riders weight: +45kg, max 95kg
- Weight: 1090gr (piece)
- Brakes: 90-130mm (selectable)
- Significantly easier entry due to new heel
- Easy switching between ride and hike function
- Multinorm - Sole. ID = is compatible with every kind of ski boot
- 2 climbing aids with 7° and 13° adjustable
- ...
The next generation of the Marker Tour: even easier to use and suitable for all types of boots!
For us still: If you don't want a PIN: Take the Tour! The binding works - always and everywhere! -
- Set up value: 4-12
- Recommended Riders weight: +50kg, max 110kg
- Weight: 1080gr (piece)
- Brakes: 90-130mm (selectable)
- Significantly easier entry due to new heel
- Easy switching between ride and hike function
- Multinorm - Sole. ID = is compatible with every kind of ski boot
- 2 climbing aids with 7° and 13° adjustable
- ...
The next generation of the Marker Tour: even easier to use and suitable for all types of boots!
For us still: If you don't want a PIN: Take the Tour! The binding works - always and everywhere! -
- DIN range: 4-10
- Recommended Riders weight: +45kg, max 90kg
- Weight: 599gr (piece)
- Brakes: 90mm, 105mm, 120mm (selectable)
- Adjustable length +/- 22.5 mm
- New rotating platform with integrated centering system
- Made in Germany
- Lifetime guarantee
- TÜV-certified safety release
- ...
For us still: One of the best PIN-TEC binding systems in terms of safety, walking and entry comfort, because the ski boot is virtually "sucked" into the binding by the stops on the toe piece.
-
- DIN range: 7-14
- Recommended Riders weight: +75kg, max 120kg
- Weight: 605gr (piece)
- Brakes: 90mm, 105mm, 120mm (selectable)
- Adjustable length +/- 22.5 mm
- New rotating platform with integrated centering system
- Made in Germany
- Lifetime guarantee
- TÜV-certified safety release
- ...
The ST Rotation 14 binding was developed for downhill-oriented touring skiers who are looking for strong downhill performance, safety and comfort.
A top product, with a lifetime guarantee, made in Germany, for all tourers who strive for perfection. -
- DIN range: 5-12
- Recommended Riders weight: +55kg, max 100kg
- Weight: only 599gr (piece)
- Brakes: 90mm, 105mm, 120mm (selectable)
- Adjustable length +/- 22.5 mm
- New rotating platform with integrated centering system
- Made in Germany
- Lifetime guarantee
- TÜV-certified safety release
- ...
The symbiosis of design and lightweight technology, original DYNAFIT, labelled by LOOK.
A top product with a lifetime guarantee, made in Germany, for all tourers who strive for perfection. -
- DIN range: 5-12
- Recommended Riders weight: +60kg
- Weight: 580gr (Piece, with brake!)
- Brakes: 90 to 120mm (selectable)
- Lateral release at the toe with DIN setting and 13 mm elasticity for the toe-cap
- Reliable release with 10 mm elasticity for the flexing ski
- Swiss made
- TÜV-certified safety release
- ...
An ingenious touring freeride binding, Swiss made and TÜV certified safety release!
Incomparable technology of sideways release at the front. Safety at the highest level, maximum comfort and easy entry. -
- DIN range: 5-13
- Recommended Riders weight: +60kg
- Weight: 650gr (Piece, with 100mm brake!)
- Brakes: 90 to 120mm (selectable)
- Toe piece: PIN, Heel piece: Alpine
- Lateral release at the toe with DIN setting and 13 mm elasticity
- Frontal release at the heel with 9 mm elasticity
- Swiss made
- TÜV-certified safety release
- ...
A great, Swiss made, touring-freeride binding!
Half PIN, half Alpine - the perfect mix of two outstanding technologies: Easy instep, comfortable use, best performance! -
- DIN range: 3-10
- Recommended Riders weight: +40 kg - max. 90kg
- Weight: 865gr (Piece)
- Brakes: 90 to 120mm (selectable)
- Adjustable length: up to 30 mm (+/- 15 mm)
- Comfortable alpine binding entry in downhill mode
- TÜV certified release
- MNC (Multi-Norm Certification): Suitable for all boot standards
- ...
The best of both worlds!
The Salomon S/LAB SHIFT binding combines the touring capability of a pin binding (low-tech) with the performance and handling comfort of an alpine freeride binding. -
- DIN range: 6-13
- Recommended Riders weight: +70 kg - max. 110kg
- Weight: 865gr (Piece, with brake)
- Brakes: 90 to 120mm (selectable)
- Adjustable length: up to 30 mm (+/- 15 mm)
- Comfortable alpine binding entry in downhill mode
- TÜV certified release
- MNC (Multi-Norm Certification): Suitable for all boot standards
- ...
The best of both worlds!
The Salomon S/LAB SHIFT binding combines the touring capability of a pin binding (low-tech) with the performance and handling comfort of an alpine freeride binding. -
- DIN range: 5-10
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 280gr (Piece, incl 90mm brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 20 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- 3 hike levels
- ...
Ultra light weight tech touring bindings, made in Italy...
The CREST: its lightweight allows long excursions and steep climbs, while the unique technical features of the heel! -
- DIN range: 4-10
- Recommended Riders weight: 40- ca. 80kg
- Weight: 330gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- 5 hike levels
- Wide Freeride Mount
- ...
Ultra light weight tech touring bindings, made in Italy...
Easy step in, best performance and an unbelievable lightweight construction are just a few worde to describe this highend piece of engeneering! -
- DIN range: 5-12
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 330gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- 5 hike levels
- Wide Freeride Mount
- ...
Ultra light weight tech touring bindings, made in Italy...
Easy step in, best performance and an unbelievable lightweight construction are just a few worde to describe this highend piece of engeneering! -
- DIN range: 3-11
- Recommended Riders weight: 40 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 3-11
- Recommended Riders weight: 40 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 3-11
- Recommended Riders weight: 40 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 5-13
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 5-13
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 5-13
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 5-13
- Recommended Riders weight: +45 - ca. 90kg
- Weight: 370gr (Piece, incl brakes)
- Brakes: 90 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Material: Aero alloys, full-metal shaving by C.N.C., stainless steel
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- 5 hike levels
- ...
A PLUS in safety and comfort with touringbindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 8-14
- Recommended Riders weight: +70kg
- Weight: 360gr (Piece, incl 108mm brakes)
- Brakes: 97 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- Wide Freeride Mount
- New FREERIDE SPACER included
- ...
Ultra light weight tech touring bindings, made in Italy...
This new version of FREERAIDER 14 is dedicated to all extreme free riders “powder addicted”, who like to go beyond all limits. -
- DIN range: 7-15
- Recommended Riders weight: +70kg
- Weight: 390gr (Piece, incl 108mm brakes)
- Brakes: 97 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- New FREERIDE SPACER included
- ...
A PLUS in safety and comfort with PIN bindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 7-15
- Recommended Riders weight: +70kg
- Weight: 390gr (Piece, incl 108mm brakes)
- Brakes: 97 - 120mm (selectable)
- Adjustable length: Boot Length Adjustment Range - 25 mm
- RAIDER EVO toe piece: The Z-value is completely adjustable at the front
- New FREERIDE SPACER included
- ...
A PLUS in safety and comfort with PIN bindings: The toe piece now has individually adjustable release values.
Innovation no. 2: The ski stoppers are automatically activated by turning the rear jaw into downhill mode. -
- DIN range: 3-10
- Recommended Riders weight: 35 - max. ca 70kg
- Weight: 1020gr (Piece)
- Brakes: 78/102mm (selectable)
- Adjustable length +/- 15mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Look FDC toe piece
- Most direct power transmission for wide skis
- Fits also on R21 and R22 Race-plate
- ...
The SPX 10 is a high-performance binding for aggressive junior skiers or small and light adults who set a Z-value of approx. max. 6-7.
-
- DIN range: 3,5 to 12
- Recommended Riders weight: 40-90kg
- Weight: 1240gr (Piece)
- Adjustable length +/- 15mm
- Brakes: 78mm
- Designed for use with R21 & R22 race plates
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Shortened mounting zone
- ...
The SPX 12 GW is a top race binding specially designed for use with the LOOK R21 and R22 race plates (WC or race version) on race skis.
Here in the limited Van Deer design!Brakes width: -
- Set up value: 7-15
- Recommended Riders weight: +70kg
- Weight: 1425gr (Piece)
- Brakes: 78mm
- Adjustable length +/- 15mm
- Designed for use with R21 or R22 race plates
- Shortened mounting zone
- ATTENTION: Fits ISO 5355 (Alpine sole)
- ...
Designed for use with R21 or R22 race plates (WC or Racing versions), the SPX 15 ROCKERFLEX is an elite-level, competition race binding.
The strongest coupling strength and longest elastic travel on the market delivers instant power transmission, precision, and control with superior shock absorption for reduced pre-release.Brakes width: -
- Set up value: 7-15
- Recommended Riders weight: +70kg
- Weight: 1290gr (Piece)
- Adjustable length +/- 15mm
- Brakes: 78mm
- Designed for use with R22 race plates
- ATTENTION: Fits ISO 5355 (Alpine sole)
- Shortened mounting zone
- ...
The SPX 15 ROCKERACE is an elite-level, competition race binding specially designed for use with the LOOK R22 race plates (WC or race version) on race skis.
Here in the limited Van Deer design!Brakes width: -
- DIN range: 4-12
- Recommended Riders weight: + 60kg - ca. 95kg
- Weight: 1150gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable heel
- ...
Still: The perfect all-mountain/freeride binding for freeriders, freestylers!
This binding can be used with all skiboots with GripWalk ISO 23223 or Alpine (ISO 5355) soleblocks. -
- DIN range: 6-15
- Recommended Riders weight: + 70kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 6-15
- Recommended Riders weight: + 70kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 6-15
- Recommended Riders weight: + 70kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 6-15
- Recommended Riders weight: + 70kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 6-15
- Recommended Riders weight: + 70kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- GW = GripWalk ISO 23223 or Alpine (ISO 5355) soleblocks
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 8-18
- Recommended Riders weight: + 80kg
- Weight: 1245gr (Piece)
- Brakes: 75 - 130mm (selectable)
- Adjustable length +/- 3mm
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- Turntable system
- ...
Tor piece completely made of aluminium, on ball system, jaws continuous and 3D rotatable - conversion possibility to CAST system!
All stopper widths up to 130mm available! -
- DIN range: 3-10
- Recommended Riders weight: + 30kg - ca. 85kg
- Weight: 717gr (Piece)
- Brakes: 100mm
- Adjustable length +/- 20mm
- SOLE ID = is compatible with every kind of ski boot
- Compact2 heel automat
- ...
The ideal choice for all freeride and freestyle aspirants. Also nice and light, a perfect choice especially for ladies and juniors!
Brakes width: -
- DIN range: 3-11
- Recommended Riders weight: + 40kg - ca. 95kg
- Weight: 820gr (Piece)
- Brakes: 90-130mm (selectable)
- Adjustable length +/- 20mm
- MULTINORM = is compatible with every kind of ski boot
- Low stance for the extra feeling
- ...
The new Marker Squire 11 is the entry into the freeride world.
Progressive, very light and robust freeride/freestyle binding for all riders who pay attention to weight, price, quality and style! -
- DIN range: 3-11
- Recommended Riders weight: + 40kg - ca. 95kg
- Weight: 820gr (Piece)
- Brakes: 90-130mm (selectable)
- Adjustable length +/- 20mm
- SOLE ID = is compatible with every kind of ski boot
- Low stance for the extra feeling
- ...
The new Marker Squire 11 is the entry into the freeride world.
Progressive, very light and robust freeride/freestyle binding for all riders who pay attention to weight, price, quality and style! -
- DIN range: 4-13
- Recommended Riders weight: + 50kg - ca. 100kg
- Weight: 1030gr (Piece)
- Brakes: 90-130mm (selectable)
- Adjustable length +/- 25mm
- Triple Pivot Light toe piece
- MULTINORM = is compatible with every kind of ski boot
- Inter Pivot 3 Piston technology for perfect power and stable ride!
- ...
The pro freeride binding for lighter riders, extremely versatile with MULTINORM: Whatever boot you wear, all Marker MULTINORM bindings are compatible to every kind of ski boot! .
-
- DIN range: 6-16
- Recommended Riders weight: + 60kg
- Weight: 1070gr (piece)
- Brakes: 90-130mm (selectable)
- Adjustable length +/- 25mm
- Triple Pivot Light toe piece
- MULTINORM = is compatible with every kind of ski boot
- Inter Pivot 3 Piston technology for perfect power and stable ride!
- ...
Simply superior skiing performance for freestylers and freeriders in every condition. With MULTINORM: Whatever boot you wear, all Marker MULTINORM bindings are compatible to every kind of ski boot!
-
- DIN range: 6-16
- Recommended Riders weight: + 60kg
- Weight: 1070gr (piece)
- Brakes: 90-130mm (selectable)
- Adjustable length +/- 25mm
- Triple Pivot Light toe piece
- MULTINORM = is compatible with every kind of ski boot
- Inter Pivot 3 Piston technology for perfect power and stable ride!
- ...
Simply superior skiing performance for freestylers and freeriders in every condition. With MULTINORM: Whatever boot you wear, all Marker MULTINORM bindings are compatible to every kind of ski boot!
-
- DIN range: 2-7
- Recommended Riders weight: + 20kg - ca. 50kg
- Weight: 770gr (Piece)
- Brakes: 70 - 90mm (selectable)
- Adjustable length +/- 15mm
- Look Full Action toe piece
- Fits Alpine (ISO 5355) and GripWalk (ISO 23223) soles
- ...
The NX 7 GripWalk binding is a user-friendly ski binding for kids and teens.
Its lightweight toe piece and NX heel design work together to provide strong power transfer and fluid shock absorption for ambitious young racers. -
- DIN range: 0,75-4
- Recommended Riders weight: + 15kg - ca. 35kg
- Weight: 550gr (Piece)
- Brakes: yes, kidsski
- Adjustable length +/- 25mm
- Full Action Jr toe piece
- ...
Lightweight, user-friendly performance designed specifically for junior skiers ensures protection and ease of progression.
Brakes width: -
- Compatibility:
Look Pivot 12, 14, 15 & 18
Rossignol FKS 120, 140 & 180 - High quality adhesive template for binding assembly
- incl. description
Simply stick onto the ski, drill the ski, put binding glue into the holes and tighten the screws.
- Compatibility:
-
- Fits: Marker Alpinist 8, 9 or 12
- Choose your desired size / skiwaist
- Contains: 1 Pair (2 stoppers)
Changeable sparepart brakes fitting for Marker Alpinist bindings
-
- Fits: Marker Kingpin 10 and 13
- Choose your desired size / skiwaist
- Contains: 1 Pair (2 stoppers)
Changeable sparepart brakes fitting for Marker Kingpin bindings
-
- Fits: Duke, Baron, Jester, Griffon, Squire, Marker Tour
- Choose your desired size / skiwaist
- Contains: 1 Pair (2 stoppers)
Changeable sparepart brakes fitting for Marker Royale Family bindings
-
- Fits: Salomon / Atomic / Armada SHIFT 10 and 13
- Choose your desired size / skiwaist
- Contains: 1 Pair (2 stoppers)
Changeable sparepart brakes fitting for Salomon / Atomic / Armada SHIFT 10 und 13 bindings
-
- Suits Look SPX, PX 12, NX 10, NX 11, NX Exclusive,...
- Choose your desired size
- Contains: 1 Pair (2 stoppers)
Interchangeable brakes for Look SPX, NX and PX Racing bindings.
Brakes width: -
Interchangeable brakes for Look SPX and PX Racing bindings.
NOTE! Fits only the Worldcup RACING version!- Contains: 1 Pair (2 stoppers)
- Choose your desired size
-
- Fits all Pivot DUAL, GW and Racing models
- Just remove heelpiece from the plate and change it
- Choose your desired width
- Contains: 1 Pair (2 stoppers incl. baseplates)
Interchangeable brakes incl. baseplate and conecting parts for all Pivot bindings.
-
- Fits Fritschi Tecton and Vipec bindings
- Choose your desired size / skiwaist
- Contains: 1 Pair (2 stoppers)
Very easy to change, just selct your desired size
-
- Fits Fritschi Xenic bindings
- Contains: 1 Pair (2 stoppers)
- Choose your desired size / skiwaist
Very easy to change.
Brakes width: -
- Fits Fritschi Freeride or Eagle bindings
- Contains: 1 Pair (2 stoppers)
Very easy to change.
Brakes width: -
- AFD friction plates for GripWalk soleblocks for Look Pivot 15 or 18
- Fits for GripWalk soles
- Scope of delivery: 1 pair of plates
These AFD’s are only compatible with GripWalk soles.
So if you are planing to use a GripWalk equiped boot:
This is your tool for the CAST system. -
- AFD friction plates for WTR or Touring soleblocks for Look Pivot 15 or 18
- Fits for WTR or Touring soles
- Scope of delivery: 1 pair of plates
These AFD’s are only compatible with WTR or touring soles.
So if you are planing to use a WTR or Touringsole equiped boot:
This is your tool for the CAST system. -
- AFD friction plates for alpine soleblocks for Look Pivot 15 or 18
- Fits for DIN ISO 5355 soles
- Scope of delivery: 1 pair of plates
These AFD’s are only compatible with DIN ISO 5355 soles, your traditional Alpine sole.
So if you are planing to use a pure alpine boot:
This is your tool for the CAST system. -
From one make two! Use the Freetour Upgrade Kit for multiple skis at a lower additional cost.
- Second Kit for mounting the CAST system on another pair of skis
- Scope of delivery: 1x Second Kit for tor piece and climbing aids, incl. screws
You want to equip a second pair of skis with the CAST system?
With the Second Ski Kit you can use the tip of a Pivot 15 with the heel of any other Pivot!
This kit contains the freetour brake holders and climbing aids as well as the plates for the front heads (for a pair of skis), which are permanently mounted on the skis.
So you can easily change the front head from ski to ski!
It does not include the Tech Head and AFD plate as you should already have these with your Freetour Upgrade Kit order. -
- Spare part - the brake retainer for your Pivot heel piece
- Scope of delivery: 1x pair brake retainer and climbing aids, incl. screws
This is a spare part pair of freetour brake holders and climbing aids incl. the matching screws.
It does not work as a second kit! Therefore you also need the plates for the front heads (for a pair of skis), which are permanently mounted on the skis! -
Turn one into (almost) two!
Combine a set of additional Pivot front heads on these extra toe pedestals with the Freetour Second Ski Kit and you have two complete alpine setups with a pair of tech front heads that you can swap between the kits.- Scope of delivery: 2 toe pedestals for Look Pivot 15 or 18
- You can easily order the different skid plates as well (extra)
Combine a set of additional Pivot front heads on these extra base bases with the Freetour Second Ski Kit and you have two complete alpine setups with a pair of tech toe peices that you can swap between the kits.
This pair of bases works with either WTR, GripWalk or Alpine AFD glide plates - depending on the boot you want to use them with. -
- Adjustment tool for all ATK bindings
With the adjustment spacer tool you can perfectly adjust the contact pressure of your ATK binding.
In this way, you avoid unwanted false releases and damage to the binding due to too tightly adjusted contact pressure. -
- Fits ATK Raider 12 and Freeraider 14 (with skibrake on heel piece)
- Suitable for skis with a centre width from >100mm
- Does NOT fit for the EVO version (here you need the spacer AL13)
When comparing tech bindings with alpine ones we can state that the toe piece is much stiffer and precise on the tech ones. You cannot say the same for the heel parts: on tech bindings, the boot sole cannot be in touch with the ski because every boot has a different sole thickness.
With the new adjustable FREERIDE SPACER we covered and exceeded the gap in between tech and alpine bindings providing an astonishing downhill performance.
Thanks to this accessory, the gap between the Tech bindings and the Alpine bindings is closed! Guaranteeing a precision superior to all other models found on the market.
Attention: Spacer can only be mounted on skis with a centre width of >100mm.
Note: Freeraider 14 (from model 2021 on) is allready equiped with the spacer!) -
- Fits with: RT8 EVO, RT10 EVO, R11 EVO, R13 EVO, FR15 EVO
- Suitable for skis with a centre width from >100mm
When comparing tech bindings with alpine ones we can state that the toe piece is much stiffer and precise on the tech ones. You cannot say the same for the heel parts: on tech bindings, the boot sole cannot be in touch with the ski because every boot has a different sole thickness.
With the new adjustable FREERIDE SPACER we covered and exceeded the gap in between tech and alpine bindings providing an astonishing downhill performance.
Thanks to this accessory, the gap between the Tech bindings and the Alpine bindings is closed! Guaranteeing a precision superior to all other models found on the market.
Attention: Spacer can only be mounted on skis with a centre width of >100mm.
Note: FR 15 EVO is allready equiped with the spacer! -
- Easy to mount
- Maximum extension: 60cm
- Maximum load: 120kg
- Weight: 15gr
- Material: PU coating + Kevlar
Maximum resistance and lightness for a cutting-edge leash with a Kevlar® core. It is externally coated with a polyurethane spiral which acts like a spring perfectly following the skier’s movements. It reduces most of the annoying risks such as getting tangled in branches or spurs without ever being in the way during walk mode. The leash is equipped with a ring which allows attachment to the boot in case it can’t be applied directly on it; to be inserted in series with the carabiner.
- 1
