Wax & Skiservice Tools

Special binding drill for alpine skis.
You will find the required drill size marked on your skis.

3,8 is required for some freeride or freetouring skis.

• Drill diameter: 4,1mm
• Drill lenght: 9mm

Special binding drill for alpine skis.
You will find the required drill size marked on your skis.

4.1 is the drill for most skis with titanal layering!

• Drill diameter: 3,6mm
• Drill lenght: 9mm

Special binding drill for alpine skis.
You will find the required drill size marked on your skis.

3,6 is normally the drill size for skis without titanal or touring skis.

Special binding drill especially for freetouring skis.
You will find the required drill size marked on your skis.

3,9 is required for some freeride or freetouring skis.

• Drill diameter: 3,5mm
• Drill lenght: 9mm

Special binding drill for alpine skis.
You will find the required drill size marked on your skis.

3,5 is normally the drill size for skis without titanal or touring skis.

• Scope of delivery: 100ml bottle

Special glue for ski binding assembly, lubricates when screwing in, seals the drill hole and holds the screw firmly in the ski.
This special glue prevents water from penetrating the connection holes between the fasteners and the wooden core of the ski, and at the same time enables the screws to be fastened correctly.

• Scope of delivery: 20pcs

Wooden plugs for closing old drill holes or torn-out drill holes.
Drive the dowels firmly into the ski with the binding glue, cut off the overhang cleanly - this way you can close an old hole again and even drill a new one!

• Diameter: 8,5mm
• Scope of delivery: 10pcs

Wintersteiger drive in plastic inserts which can be hammered in to repair stripped holes or when a binding mounting screw has sheered off on skis. They can also be used when changing the binding type on a ski (alpine to touring for instance) if the new holes are within 12 mm of the original holes.
Installation tip: Drill out old binding holes and coat dowel with 2-component adhesive and hammer into old binding hole.
NOTE! These are not intended for multiple or repetitive use (i.e. swapping and re-fitting bindings between skis)

• Scope of delivery: 20pcs
• Colour: black

Plastic plugs for closing old holes during binding assembly.
The plugs are hammered firmly into the old holes (using special binding glue), the excess is cut off cleanly - this way you can close an old hole securely and tightly again.

• Scope of delivery: 500 pcs
• Colour: Mix

Plastic plugs in different colours for closing old holes during binding assembly.
The plugs are hammered firmly into the old holes (using special binding glue), the excess is cut off cleanly - this way you can close an old hole securely and tightly again.

• Scope of delivery: 8pcs. per order (for 4 pairs of skis)

Rubber bands to lock the brakes while waxing, tuning the edges etc.

• Optimal for all conventional ski bases
• Light the candle, drip on the wax, and done.
• Contains: 5 pcs

Special candles for small base repairs.

• Optimal for all conventional ski bases
• Light the candle, drip on the wax, and done.
• Contains: 5 pcs

Special candles for small base repairs.

• 90 cm flexible steel leash
• Secures your skis, board, bike, surfboard,...
• Four-digit code to lock up sports equipment

The stable version of Docs retracting cable that holds up to 2 boards and takes up less room in your pocket.
Combination lock with steel cable (90 cm) and four-digit code to lock up sports equipment.

• Tool with left-right option
• All bits
• Wrench in 2 sizes (8 and 10)

Your tool for urgent cases...
Also for bike use!
A wintersports tool with left-right thread, hex driver and four extra bits stored in the handle.

• Contains: 300ml (66,33 Euro/1L)

To remove tenacious dirt on hybrid adhesive from your Contour skins and refreshes the adhession!

• Contains: 2 pieces for 1 pair of skins

To clean the adhesive and improve its performance. Also comes with every hybrid skin

• Contains: 75 ml tube
• toluol-free solvent

To renew the adhesive of your climbing skins.
Suits on any other skin of other brands.
Note: Does not work on Hybrid skins!

• Handy „all in one“ solution in a pocket format
• With integral sponge applicator and polishing felt
• Gives optimal gliding properties and provides base care
• Fast and easy application
• Biodegradable
• Contains: 100ml/98gr

Biodegradable, universal liquid wax for all snow types and temperatures.

• Handy „all in one“ solution in a pocket format
• With integral sponge applicator and polishing felt
• Gives optimal gliding properties and provides base care
• Fast and easy application
• Snow temperatures: 0--20°
• Contains: 75ml

Super fast, universal liquid wax for snow temperatures 0--20°.
Perfect for racing skis, Nordic skis or freeride skis.

• Tube with integral sponge applicator
• Gives optimal gliding properties and provides base care
• Fast and easy application
• Biodegradable
• Contains: 75ml/72gr

Biodegradable, universal ski wax paste for all snow types and temperatures.

• Gives optimal gliding properties and provides base care
• Fast and easy application
• Comes with polishing felt
• Also suitable for side walls
• 24/7: for all snow types and temperatures
• Handy pocket format
• Biodegradable
• Contains: 50gr/50ml

Universal wax stick to rub on, for all snow types and temperatures.
Practical handy format, fits into your trouser pocket. For quick application on the go.

• Melting temperatur: 140 ~150 °C
• Snow temperature: 24/7: for all snow types and temperatures
• Ski wax from sustainable raw materials
• Ecological paper packaging
• Biodegradable
• Contains: 150gr/160ml Wax

The new recipes used in the Natural ski wax line are based on sugar cane material. This is an upcycling material from the sugar industry that is cleaned and processed before use.
Natural raw materials based on rice and beeswax are also used.

This set at a SPECIAL PRICE includes:

• Wax case (small)
• 3 shots Liquid Yellow, Red, Blue 3x100 ml
• 20 pieces Holmenkol CareFleece
• Finish cork

The Holmenkol Liquid Set "Basic" offers you all wax and care products in a handy case and at a special price, which enable an optimal and competition-ready preparation of your ski & board bases.

• Snow temperature: For snow temperatures from -4° to -14° C
• Contains: 250ml Wax

New liquid wax variant of the top seller Betamix. Suitable for all types of snow!
Simple application: Apply to the surface with a fleece, leave to soak in for approx. 10 min and then polish out!

• Melting temperatur: 115 ~125 °C
• Snow temperature: For snow temperatures from 0° to -4°C!
• Contains: 150gr/160ml Wachs

High quality base and training wax based on hydrocarbon basis. For soft, fresh and fine-grained snow. Stands out due to extreme abrasion resistance.

• Melting temperatur: 125 ~135 °C
• Snow temperature: For snow temperatures from -4° to -14° C
• Contains: 150gr/160ml Wachs

High quality base and training wax with a hydrocarbon basis. For all snow types.
Easy application, stands out due to extreme abrasion resistance. Ideal for use as transport wax.

• Melting temperatur: 115 ~145 °C
• Snow temperature: For snow temperatures from 0° to -14° C
• Contains: 2x 35g Wax

Practical set of 2 with one bar each of Alphamix YELLOW and Betamix RED.
Highest quality basic, base and training wax on a hydrocarbon basis. Excellent for use as a transport wax.
Suitable for all types of snow, easy to use.
Impresses with its extreme abrasion resistance and wide range of use.

• Melting temperatur: 140°-150°C
• Snow temperature: 0° to -20°C
• Contains: 2x 35gr/70ml Wax

Lightly fluorinated base wax for alpine and nordic skiing and ski jumping. Application ranges from icy, aggressive snow and artificial snow to wet snow. Ideal for indoor ski complexes. Perfect base wax for long distances. Optimally suited to the ice track during ski jumping.

• Melting temperatur: 115~125°C
• Snow temperature: -12° to -20°C
• Contains: 2x 35gr/70ml Wax

Highly fluorinated synthetic racing wax.
The success wax from the World Cup for maximum water and dirt repellency.
It provides very high acceleration and has the top marks in the glide category.

• Contains: 40gr

Special paraffin to prevent skins from icing up.
Works on any skin brand!

• Prevents snow and ice from sticking on your climbing skins!
• Improves gliding and climbing characteristics
• Ensures optimum gliding characteristics and care of skin
• Particularly kind to skins
• Handy pocket format
• Application: Rub on before and during your ski tour, work in with a polishing fleece.
• Contains: 50gr/50ml

Skin impregnation with this universal wax stick for applying to skins and surfaces. For all snow types and temperatures.
Perfect care for all touring skin types and the surface!

• Prevents snow and ice from sticking on your climbing skins!
• Care for all kinds of climbing skins
• Ensures optimum gliding characteristics and care of skin
• Environmentally friendly air spray which is kind to skins
• Application: Spray on prior to cross-country skiing, allow to dry and iron lightly with an iron (100 °C)
• Also ideal for Nordicskis/skins
• Contains: 125ml/120gr

 Skin impregnation, for all snow types and temperatures.

• Contains: 20 pieces

Durable special fleece for all cleaning and finishing work.
Ideally recommended for use with HOLMENKOL Liquid products.

• Dimensions: 150x250mm
• 100x pieces

Ensures uniform and careful wax application and avoids direct contact between the waxer and ski surface.

• Size: 70x50x20mm
• Contains: 1 rubber block

For defusing the fresh grinded edges in the front and back areas.
Prevents dangerous canting or unpleasant cutting of the skis.

• Size: 125x70mm

Ideally suited for polishing up waxed skis/boards.
Indispensable for brushing out wax after hot waxing.
Universal brush for all steps of ski preparation.

• Size: 125x70mm

The Holmenkol Base Brush Micro Finish x-fine is a very fine and effective steel brush for absolutely perfect brushing out to the deepest structures.
Removes last wax residues deep inside the structure and provides more speed.
Optimally suited for finishing products.

• Shape: Oval with hand-strap
  

Rough bronze brush for cleaning the ski base before and during waxing with hot wax.
Very good handling due to large hand contact surface and holding strap. Perfect for exposing the structure. The ideal all-round brush.

• Shape: Oval with hand-strap
  

Rough steel brush for cleaning the ski base before and during waxing with hot wax.
Very good handling due to large hand contact surface and holding strap. Perfect for exposing the structure. The ideal brush for brushing out base waxes. World Cup proven!

• Size: Oval, 125x70mm

Ultra-fine brush for final exposure of the structure.
Removes last wax residues deep inside the structure and provides more speed.
Ideally suited for finishing products.

• Shape: Oval with hand-strap
  

World Cup proven coarse bronze brush for cleaning the base before and during waxing with hot wax.
Very good handling due to large hand contact surface and holding strap. Perfectly suited for exposing the structure. Extremely durable. The standard brush in alpine racing.

• Size: 125x70mm

Optimal steel brush for cleaning the base before and during waxing with hot wax.

• Size: 125x70mm

The ideal all-round brush.
Indispensable for brushing out wax after hot waxing.
Rough copper brush suitable for cleaning the ski base before and after waxing and for brushing out hot wax.
Perfect for exposing the structure.

• Dimensions: 125 mm x 60 mm

Extra-sharp, durable Nirosta blade. Optimally suitable for edge tuning and working surfaces.
For base repairing or wax removing from the base.

• Dimensions: 130 mm x 60 mm x 5mm

Very high-quality Plexiglas blade for removing excess hot wax.
Edges precisely flat-milled and fine-ground.

• Base angle of 88° is adjustable down to 85° using the appropriate angle shim(s).
• Can be used for all files and stones from 70 mm.
• With file clamp and interchangeable plates with corresponding conicity
• Note: Comes withhout files

World Cup equipment for edge tuning of alpine skis and snowboards.
Precise angle adjustment by degrees from 88° to 85° for use with ski files, cutting diamonds and oxyd stones.
Stainless steel protects the base, is value stable and very handy.

• Angle can be adjusted by degrees between 0.5° and 1.5°
• Can be used for all files width 20-25mm and thickness 6mm
• Note: Comes withhout files

World Cup tool for running base - side edging of alpine skis and snowboards.
Ideal tool for removing steel edges from the surface of skis and snowboards.

• Grinding angle adjustable from 90° to 85° in 0,5° Klicks
• Cuts metal and plastic
• Perfect Sidecut adjustment due to two movable inserts
• Note: Comes with a high quality knife 20588

To remove the ABS material from the sidewall (this prevents the file from becoming clogged with plastic material!).
Note: The ABS material MUST be removed before sanding the edge, otherwise the edge cannot be sanded free and get the perfect angle.

• Professional diamond file for finishing ground ski and snowboard edges
• Ideal for polishing and hardening steel edges

Diamond file for finishing ground ski and snowboard edges. Ideal for polishing and hardening steel edges.
Suitable for Steel Edge Worldcup (Art. 24475), Profi Edger (Art. 24497), World Cup File Guide and Semi Edger (Art. 24496).

• Dimensions: 100 mm x 20 mm x 6 mm.

The aluminium oxide stone softens edges before grinding and removes coarse damage - very important, because without the oxide stone you will damage the file!!!!
It is the inexpensive alternative to the coarse diamond file.
Grinding stones are indispensable for edge grinding. They are used to remove hardening on the edge before grinding with the file, which would otherwise damage the expensive files. After grinding, the edges are polished, because the smoother the edge, the longer the sharpness lasts.

• Size: 100mm x 30mm
• Cut: 9TPI

Note: Suitable für Semi Edger edge grinder!
Rough file with proven World Cup record for pre-grinding of ski and snowboard edges.

• Size: 200mm x 20mm
• Cut: 15

The chrome-plated World Cup professional file for the exact fine grinding of ski and board edges.
Can be ideally clamped into the various Holmenkol file guides.

• Size: 150mm x 20mm
• Cut: 15

The chrome-plated World Cup professional file for the exact fine grinding of ski and board edges.
Can be ideally clamped into the various Holmenkol file guides.

• Size: 300mm x 30mm
• Cut: 9TPI

World Cup proven coarse, large file for pre-grinding ski and snowboard edges.
This file is a standard file that is absolutely necessary for every self-ski service.
Body file for removing rough base damage, pre-grinding edges and removing excess material during base repair.